Product Program - Concretal-System

Sol-silicate one-component paint with absolutely lightfast pigments for opaque protective concrete coatings (acc. to protection grade W).

Concretal-W is highly water-repellent.

Protection grades: Water protection, chloride protection, weathering protection

Concretal-W-Grob is used as priming coat for difficult and repaired concrete surfaces.

Concretal-W-Grob closes hairline cracks, matches textural
differences, etc.

Dilution for Concretal-W, Concretal-W-Grob, Concretal-Lasur and KEIM Contact-Plus

Sol-silicate acrylic one-component paint according to ZTV-ING OS-B and OS-C with high protection from carbonation for opaque protective concrete coatings with mineral matt surface and silicate character.         

Protection grades: CO₂-protection, water protection, chloride protection

Sol-silicate one-component paint for translucent or opaque thin layer coatings.

Especially economical, preventive concrete protection.

For a translucent finish or to equalize visual shortcomings dilutions in any ratio with
Concretal-Fixativ are possible.

Protection grade: Weathering protection

Sol-silicate based pigment-free additive for Concretal-Lasur. The desired degree of transparency is achieved by adding the corresponding quantity of Concretal-Base to Concretal-Lasur.

KEIM Design-Base allows mineral matt, low-pigment finishes together with ideal application consistency, reduced settling and weather-resistant layer thicknesses.

Mineral, cement-containing, one-component corrosion protection and bonding bridge to German guidelines ZTV-ING PCC I and II. For the use as mineral corrosion protection on concrete reinforcement and as bonding bridge for a non-interlocking bond in combination with
KEIM Concretal-Mörtel-R in concrete repair.

Mineral, cement-containing, one-component coarse mortar to German guidelines ZTV-ING PCC I and II. Repair mortar to repair larger defective areas. Layer thicknesses from 5 mm up to 50 mm (multilayer). For use in combination with Concretal-MKH. Low-shrinkage and crack-free hardening even when exposed to dynamic loads. Non-carbonising, resistant to frost and de-icing salt, water-impermeable, sprayable with wet mix process.

For application according to PCC II of the German guidelines ZTV-ING.
To equalise repaired areas (mortar) and to close pores and blowholes by scratch filling. As full-cover filling from 0.5 up to 4 mm layer thickness. For use as blowhole grout with the addition of
Concretal-Spezialvergütung to the mixing water. Resistant to water, frost and de-icing salt. Can be applied by wet spraying.

Repair mortar for concrete in building construction to repair defects; layer thicknesses from 5 to 80 mm (multilayer). Applicable without corrosion protection and bonding bridge, excellent adhesive power, stable in wall and overhead areas, can be smoothed like a coarse filler. Suited for the repair of lightweight concrete.

Addition to mixing water for Concretal-Feinspachtel on difficult substrates and when used as scratch filler or blowhole grout.

One-component, transparent-matt sealer, PU (polyurethane)-based, no solvents added.
To be used as transparent sealer for horizontal weathered top surfaces as well as for the transparent sealing of concrete floors.

The ideal work tool for any kind of filling application.

A silicic acid based cleaning agent to remove dirt and release agent residues on concrete surfaces. Can also be used on render substrates. Reacts, when applied, to form harmless compounds.